To Next PageTo Next PageWhat to do if Mindray Medical Equipment monitor displays characters but no images?
If your Mindray Medical Equipment monitor shows characters but no images, there might be a few reasons. First, ensure that the transmission power, overall gain, or TGC controls are properly adjusted. Second, verify that the probe is correctly and fully connected. Finally, check if the system is in freeze status and, if so, unfreeze the image.
Why is the image quality degraded on my Mindray Medical Equipment?
If the image quality on your Mindray Medical Equipment is degraded, consider these potential causes. It could be due to an incorrect exam mode, so select an appropriate one. Also, the image post-processing settings might be off, so adjust them or reset to default. Lastly, inappropriate image presets could be the issue; try resetting to the factory default presets.
How to fix a blank image on Mindray Medical Equipment even when the power indicator is on?
If the power indicator is on but the Mindray Medical Equipment monitor image is blank, the interval between turning off and restarting the system might be too short. Turn off the system and wait at least one minute before restarting. Also, the monitor brightness or contrast may be improperly set. Adjust the monitor brightness and contrast back to the factory defaults.
General| Display Size | 15.6 inches |
|---|---|
| Transducer Ports | 3 |
| Portability | Portable |
| Type | Ultrasound System |
| Display Type | LCD |
| Battery Life | 120 min |
| Imaging Modes | B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler |
| Connectivity | Wi-Fi, Ethernet, USB |
| Applications | Vascular, Cardiology, OB/GYN, Urology |
| Probe Connectors | 3 |
| Operating System | Windows |
