Mindray MX7 Service Manual

Part I Service Scenarios
Installation 21
1. LED indicator The LED indicator is on in green upon a scan success.
The LED indicator is on in red upon a scan failure.
2. Scan window Used to scan and receive barcodes.
3. Scan trigger switch Press the trigger switch to start scan.
2. Properly insert the cable terminal into the bottom interface of the barcode scanner.
3. Connect the USB connector of the cable to the USB port on the main unit.
1. Scanner interface
2. Cable terminal
4. When the ultrasound equipment is running (without the need to install a driver program), press the
scan trigger switch to scan barcode information. For other usage methods, see the barcode scanner
manual.
1.2.5.9 2D Barcode Scanner
1. Install the cable.
a The following figure shows the structure of the barcode scanner. Key components of the
barcode scanner include the LED indicator, scan window, and scan trigger switch.

Mindray MX7 Specifications

General

Display Size	15.6 inches
Transducer Ports	3
Portability	Portable
Type	Ultrasound System
Display Type	LCD
Battery Life	120 min
Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler
Connectivity	Wi-Fi, Ethernet, USB
Applications	Vascular, Cardiology, OB/GYN, Urology
Probe Connectors	3
Operating System	Windows