Mindray MX7 Service Manual

Part I Service Scenarios
Maintenance 61
7. Input the Confirmation ID and click [Activate Windows] to finish the activation.
2.3.5 Self-Test
The self-test function is inherent in MX series products and aims to test the connections of hardware
boards and the running status of the system. According to the access permission and test content, there
are three types of tests: production self-test, maintenance self-test and user self-test. This section focuses
on maintenance self-test and user self-test content.
2.3.5.1 Maintenance Self-Test Procedure
Note:
All tasks running on Doppler should be completed before entering system self test,
otherwise the self test system fails to respond. It is recommended to start self-test
software to perform the self-test after the system is started.
1. Switch to user Service and enter the password to log in.
2. Choose Setup > Maintenance > Set.
Click [Self Test] out of dialog box.

Mindray MX7 Specifications

General

Display Size	15.6 inches
Transducer Ports	3
Portability	Portable
Type	Ultrasound System
Display Type	LCD
Battery Life	120 min
Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler
Connectivity	Wi-Fi, Ethernet, USB
Applications	Vascular, Cardiology, OB/GYN, Urology
Probe Connectors	3
Operating System	Windows