10-4 Patient Data Management
Select [Report] tab to review or edit the currently-selected patient's report.
Patient
Select [Patient] tab to review or edit the currently-selected patient information.
Image operations
[Select All]: tap to select all images in the thumbnail window.
[Deselect All]: after selecting [Select All], the button changes to [Deselect All]. Cancel all
selections by selecting [Deselect All].
[Send To]: tap to send the selected image to another location, DICOM server, printer, etc.
[Delete]: tap to delete the selected image.
: Tap to change the layout.
Tap [Done] to exit Review:
10.2.5.2 Image Analysis
In image analysis status, you can view, zoom, perform image parameter adjustment and
measurements, add comments and perform cine (multi-frame) review for a stored image. The
operation steps are the same as those for real-time scanning. See the relevant sections for details.
To enter image analysis:
In image review status, double-click the selected thumbnail to open the image.
Tap the icon or to select the previous or next image.
Tap to exit image analysis.
Other operations
You can perform cine review operations in image analysis status. For details, see “6 Display &
Cine Review.”
10.2.6 iVision
The iVision function is used to demonstrate the stored images. Image files are played one by one
according to file names (including system-relevant and PC-compatible format images).
To perform image demonstration:
1. Select [Setup] -> [General] -> [iVision] to enter the iVision setting screen.
2. Add the contents to be played and select demo mode.
3. Select an item in the list and tap [Start] (in the bottom-left corner of the screen) to begin the
demonstration.
4. Tap [Exit] to exit iVision status.
The iVision setting screen is shown as follows:
To Next Page
Loading...
Need help?
General
