Barcode Reader C-15
Input a barcode example, barcode example is separated by separators (the
separator is used to set the start and end position of each item), and the barcode
data is displayed in the following items in turn.
Input a barcode example, and you can change the information of Patient ID, Other
ID, First Name, Last Name, Middle Name, Birth(Day), Birth(Month), Birth(Year),
Age, Gender and etc. in the “Content” list.
Note: Ignore item is used to add one line below the selected item to hide
unimportant patient information
Set the start and end position of each item via separators. After inputting a
barcode example, you can select item separators from the drop-down list of the
Separator. (Only separators that are input in the field box of the Scan Barcode
Example can be displayed in the drop-down list of the Separator.)
Note: You can customize the age unit of Birth(Day), Birth(Month), Birth(Year) in the
Content column. If the DOB provided by the patient contains only digit, the system
displayed an auto-generated age.
Select an age unit from the drop-down list of the "Age Unit": Year, Month, or Day.
To Next Page
Loading...
Need help?
General
