LCD Icons
All of the information you need to see during detecting and when adjusting your
detector settings is displayed on the large LCD in the control panel.
Backlight
Appears when the backlight is
on. (page 32)
Discrimination Scale
High resolution 50 segment
(–9 to 40) Discrimination Scale
for accurate, stable target
identification. (page 30)
The Discrimination Scale
indicates target signal strength
when in Pinpoint. (page 36)
It is also used to adjust Tone
Regions for advanced audio
settings.
Battery Status Indicator
Displays the charge level of the
battery. (page 8)
Sensitivity Indicator
Indicates approximate
Sensitivity level - 25 levels
shown in increments of 5.
(page 34)
Settings Menu
Settings and Advanced Settings
are in the Settings Menu.
(page 37)
Pinpoint
Appears when Pinpoint is
active. (page 36)
Frequency Display
Shows the current operating
Frequency. (page 28)
The Frequency Display also
shows error codes and indicates
the selected Tone Region for
Advanced Settings.
Detect Modes
Displays the Detect Mode:
Park, Field, Beach, Gold*
Each Detect Mode has 2
customisable Search Profiles.
(page 22)
Depth Gauge
Indicates the approximate
depth of a detected target.
(page 35)
Tracking Ground Balance
Appears when Tracking Ground
Balance is active. (page 40)
Audio Connectivity
Displays the current wired
and wireless audio devices
connected to your detector.
(page 53)
Beach Overload Indicator
Indicates an automatically
reduced transmit signal
strength in order to prevent
overload in Beach Mode
in extreme conditions.
(page 25)
Target ID Display
Shows the Target ID of a
detected target. (page 30)
The Target ID Display also shows
the values of detector settings as
they are adjusted.
User Profile*
Appears when the saved User
Profile is active. (page 33)
Setting Advanced Setting
Noise Cancel
Ground Balance
Volume Adjust Tone Volume
Threshold Level Threshold Pitch*
Target Tone Tone Pitch
Accept/Reject Tone Break
Recovery Speed Iron Bias
Advanced Setting
Setting
Detect Mode
Search Profiles
LCD Icons | 10Contents
To Next Page
Loading...
