Backlight
The EQUINOX LCD has a backlight for improved screen contrast in poor light conditions.
EQUINOX 600 has 2 backlight level settings, Off and High.
EQUINOX 800 has 4 backlight level settings, Off, High, Medium, and
Low.
The backlight is Off by default.
Backlight adjustment is global; all Detect Mode Search
Profiles will be affected by changes to this setting.
Continual use of the backlight, especially at full
brightness (High), will result in decreased battery
runtime.
Turning the Backlight On
Press the Backlight button on the top left of the control panel.
The backlight will illuminate at full brightness (High).
The Backlight icon will appear on the LCD when the
backlight is on.
The backlight setting will be remembered after the detector is
powered off. When the detector is turned on again, the backlight
will automatically return to its last-used state.
Adjusting the Backlight Brightness*
The EQUINOX 800 includes an adjustable backlight with four states:
Off, High, Medium, and Low.
1. Press the Backlight button on the left of the control panel. The
Backlight will illuminate at full brightness (High).
2. Each press of the Backlight button will reduce the Backlight
brightness by one level until the backlight is Off.
Backlight | 32Contents
To Next Page
Loading...
