Minelab EQUINOX 800 - Factory Presets

Factory Presets
The factory preset detector settings are optimised for ease of use. They will help you start
detecting successfully with minimal adjustment.
Detect Mode Search Profiles
Park 1 Park 2 Field 1 Field 2
Beach 1 Beach 2
Gold 1* Gold 2*
Frequency Multi Multi Multi Multi Multi Multi Multi Multi
Noise Cancel 0 0 0 0 0 0 0 0
Ground Balance Manual, 0 Manual, 0 Manual, 0 Manual, 0 Manual, 0 Manual, 0
Tracking Tracking
Volume Adjust 20
Tone Volume 12, 25, 25, 25, 25 12,25 4,25 4,25 4, 25, 25, 25, 25 4, 25, 25, 25, 25 — —
Threshold Level 0 12
Threshold Pitch* 4 11
Target Tone 5 50 2 50 5 5 1 1
Tone Pitch 1, 6, 12, 18, 25 1, 20 1, 20 1, 20 1, 6, 12, 18, 25 1, 6, 12, 18, 25 — —
Accept/Reject
–9 to 1
2 to 40
–9 to 0
1 to 40
–9 to 2
3 to 40
–9 to 2
3 to 40
–9 to 0
1 to 40
–9 to 0
1 to 40
–9 to 0
1 to 40
–9 to 0
1 to 40
Tone Break 0, 10, 20, 30 0 2 2 0, 10, 20, 30 0, 10, 20, 30 — —
Recovery Speed 3, 5* 3, 6* 3, 6* 3, 7* 2, 6* 3, 6* 6 6
Iron Bias 2, 6* 0 0 0 2, 6* 2, 6* 6 6
Sensitivity 20
Backlight Off
1, 2, 5 and 50 Tones Advanced Settings Presets
Park 1 Park 2 Field 1 Field 2 Beach 1 Beach 2 Gold* 1 Gold* 2
Tone Volume
1 Tone 25 25 25 25 25 25 25 25
2 Tones 12, 25 12, 25 4, 25 4, 25 4, 25 4, 25 — —
5 Tones 12, 25, 25, 25, 25 12, 25, 25, 25, 25 4, 25, 25, 25, 25 4, 25, 25, 25, 25 4, 25, 25, 25, 25 4, 25, 25, 25, 25 — —
50 Tones 12, 25 12, 25 4, 25 4, 25 4, 25 4, 25 — —
Tone Pitch
1 Tone 11 11 11 11 11 11 — —
2 Tones 1, 20 1, 20 1, 20 1, 20 1, 20 1, 20 — —
5 Tones 1, 6, 12, 18, 25 1, 6, 12, 18, 25 1, 6, 12, 18, 25 1, 6, 12, 18, 25 1, 6, 12, 18, 25 1, 6, 12, 18, 25 — —
50 Tones 1, 20 1, 20 1, 20 1, 20 1, 20 1, 20 — —
Tone Break
2 Tones 0 0 2 2 0 0 — —
5 Tones 0, 10, 20, 30 0, 10, 20, 30 2, 10, 20, 30 2, 10, 20, 30 0, 10, 20, 30 0, 10, 20, 30 — —
50 Tones 0 0 2 2 0 0 — —
Factory Presets | 63Contents