Minelab EQUINOX 800 - Assembled Detector

Armrest
Armrest strap
Attachment
points
Upper shaft
Handle
(With internal Lithium-ion
rechargeable battery)
Stand
Middle shaft
Lower shaft
Coil yoke assembly
Upper shaft twistlock
Middle shaft twistlock
Control unit (rear view)
Charging interface
Coil cable connector socket
Speaker
Headphone socket
3.5 mm (1/8-inch) with
waterproof dust-cap
Coil cable
EQX 11 smart coil
Skidplate
Yoke Washers (×2)
Yoke nut
Yoke bracket
Yoke
Yoke bolt
Assembled Detector
Once you have assembled your EQUINOX it should look like the below.
The major parts listed are referred to throughout this Instruction Manual.
Side buttons
Assembled Detector | 7Contents