104
PG DRIVES TECHNOLOGY
39
SP1B - W
ARNING SUMMARY
SK73750/7
1 Introduction
This section summarizes all of the very important warnings that appear throughout
the text of this manual. Do not operate the SP1 Progammer without reading,
understanding and observing the following warnings. Failure to observe these warnings
could result in UNSAFE CONDITIONS for the user of a vehicle or affect the reliability of
the programmer and controllers. PG Drives Technology accepts no liability for losses
of any kind arising from failure to comply with any of the conditions in the warnings
listed below.
2 Warnings
2.1 Introduction
Programming should only be conducted by competent
personnel with in-depth knowledge of PGDT electronic
controllers. Incorrect programming could result in an unsafe
set-up of a vehicle for a user. PGDT accept no liability for
losses of any kind if the programming of the controller is
altered from factory pre-set values.. Chapter 1 section 1.1.
2.2 The SP1b Programmer - Engineering Version
Programming should only be conducted by competent
personnel with in-depth knowledge of PGDT electronic
controllers. Incorrect programming could result in an unsafe
set-up of a vehicle for a user. PGDT accept no liability for
losses of any kind if the programming of the controller is
altered from factory pre-set values.. Chapter 1 section 2.2.
To Next Page
Loading...
