106
PG DRIVES TECHNOLOGY
41
SP1B - W
ARNING SUMMARY
SK73750/7
2.8 Tips on Pogramming
If this method is used rather than using motor manufacturer’s
figures, then to allow for the effects of temperature, the
compensation level should be confirmed by performing the
test again when the motor and controller have fully cooled.
Chapter 1 section 6.
2.9 High Pedal Disable
Switching this option Off will contravene international
mobility vehicle safety legislation. If, under exceptional
circumstances, the condition set being set to Off is required,
it becomes the sole responsibility of the scooter manufacturer.
PGDT accept no liability for losses of any kind resulting
from this opotion being set to Off. Chapter 1 section 7.1.6.
2.10 Introduction
Diagnostics should only be conducted by healthcare
professionals with in-depth knowledge of PGDT electronic
controllers. An incorrect or badly effected repair could result
in an unsafe set-up of a scooter. PGDT accept no liability
for losses of any kind arising from an incorrect or badly
effected repair. Chapter 2 section 1.
2.11 Servicing of Defective Units
PGDT accept no liability for losses of any kind arising from
unauthorized opening, adjustment or modification to the
controller. Chapter 2 section 7.
To Next Page
Loading...