MiniFinder PICO - User Manual

MiniFinder
®
Pico
User Manual
English
© 2020 MiniFinder® All rights reserved
Updated: 2020/11/18

Summary

Device Operation & Management

Initial Setup and Operation

Covers charging the device for the first time, starting it up, and shutting it down using the specified buttons.

LED Indicator Guide

MiniFinder GO App Download

Mobile App Installation Links

Provides direct links for downloading the MiniFinder GO tracking system application for iOS and Android mobile devices.

Device Status Indicators

Understanding Device Status Colors

Alarm Notification System

Receiving and Viewing Alerts

Explains how the app sends notifications for various alarms and how to access and manage active alarms.

Action Menu Functions

Viewing Device History

Navigating Historical Positioning Data

Position History Analysis

Interpreting History Map Data

Calling Your Device

Initiating a Call to the Device

Authorizing Phone Numbers

Setting Up Authorized Contacts for Alarms

Explains how to authorize phone numbers for receiving calls and alarms, including country code selection and entering phone numbers.

Making Device Calls

Device-Initiated Call Procedure

Details how to initiate a call from the MiniFinder Pico itself by pressing and holding the on/off/call button for a specific duration.

Fall Alarm Configuration

Enabling and Activating Fall Detection

Guides users on enabling the Fall Alarm feature within the app's setup menu and activating it to detect accidental falls.

Low Battery Alerts

Activating Low Battery Notifications

SOS Emergency Function

Configuring SOS Panic Alerts

Instructions on how to enable the SOS function in the app to send panic alarms and receive calls from authorized numbers upon activation.

Panic Button (SOS) Operation

Using the SOS Emergency Button

Explains how to activate the SOS alarm by pressing the panic button, including call dialing procedures and how to end an active call.

Speeding Alarm Settings

Setting Speed Thresholds for Alerts

Power Saving Mode Operation

Enabling Energy Saving Features

Position Update Interval Adjustment

Geofence Alarm Configuration

Creating Virtual Geographical Areas

Provides a step-by-step guide on drawing and defining a virtual geographical area on the map to trigger entry or exit alarms.

Editing Geofence Areas

Modifying Geofence Properties and Rules

MiniFinder GO App Settings

Configuring App Preferences and Options

Safety Statement and Instructions

General Safety Precautions

Lists essential safety precautions for using the MiniFinder, covering handling, environmental factors, and child safety to prevent hazards.

Built-in Battery Handling

Provides specific instructions regarding the built-in battery, such as correct charging methods, avoiding replacement, and using certified chargers.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The MiniFinder Pico is a compact GPS tracking device designed for monitoring, protecting, and locating loved ones remotely. It features a built-in 8 MB flash memory that stores GPS information when GSM network coverage is unavailable, automatically transmitting the data once coverage is restored. This function depends on an additional MiniFinder GO service.

Function Description:

The MiniFinder Pico is a versatile tracking device with several key functions:

• Real-time Tracking: Monitors GPS devices in real-time through the MiniFinder GO APP.
• Alarm Notifications: Sends alarm notifications for various events, including Geofence alarms, Fall alarms, SOS/Panic alarms, Low battery alarms, and Speeding alarms. These notifications are sent to the user's phone or tablet screen, with optional audio alerts, vibration, and flashing alarms.
• Two-way Communication: Allows users to make and receive calls from the device to authorized phone numbers.
• Positioning History: Records and displays the device's positioning history on a map, including total distance, total time, and max speed.
• Power Saving Mode: Optimizes battery life by deactivating GPS and GSM modules when no alarm or event occurs, activating them only when needed.
• Customizable Update Interval: The device's tracking update interval can be adjusted to balance tracking frequency with battery consumption.
• Tag Function (Mark Places): Users can mark specific locations on the map with custom names, descriptions, icons, and even attached images.

Important Technical Specifications:

• Size: 60 mm x 41 mm x 16 mm
• Weight: 35g
• Battery: 900 mAh Li-ion, rechargeable
• GSM Frequency: 850/1900MHz, 900/1800MHz
• Charging Voltage: Micro USB, DC 4.2V~5.5V/400mA
• Operating Temperature: -10°C to +60°C
• Fix Time Against GPS: Active 1s, Warm 35s, Cold 45s
• GPS Sensitivity: -158dB
• Power Consumption: 45mA Standby
• GPS Chip: u-Blox 7, AGPS support (Swiss Made)
• Standby Time: Up to 20 days
• Memory: 8Mb
• IP Class: IP65

Usage Features:

• Device Activation:
  • Charge the device for 4 hours before first use.
  • Start the unit by pressing the ON/OFF button for 3 seconds.
  • Turn off the device by pressing and holding both the SOS and ON/OFF buttons for 3 seconds.
• LED Indicators:
  • Green LED:
    • Slow blink (1 sec): Searching for GSM network.
    • Single blink (3 sec): Connected to GSM network.
    • Double blink (3 sec): Connected to GPRS network.
    • Steady light: No or faulty SIM card.
  • Blue LED:
    • Slow blink (1 sec): Searching for GPS signal.
    • Single blink (3 sec): Connected to satellite.
    • Steady blink: Charging.
    • No light: Sleep mode or fully charged.
• MiniFinder GO APP:
  • Download the "MiniFinder GO GPS Tracking" app from the Apple App Store or Google Play Store.
  • Device Status: Displays the device's online status (Green: online, Orange: passive, Red: passive for over an hour, White: offline).
  • Action Menu: Accesses history, call function, and settings for each device.
  • History Tracking: View past positions, including start/end points, specific selected positions, and detailed statistics (total distance, time, max speed).
  • Call Function: Initiate a call to the device from the app.
  • Rename Device: Customize the device's name within the app settings.
  • Authorize Telephone Numbers: Set up to two authorized phone numbers for calls and alarms. Number 1 is the primary alarm receiver, and Number 2 receives calls from the call button.
  • Fall Alarm: Enable a fall detection alarm that sends notifications to the app. To end an ongoing fall alarm, press the SOS button once.
  • Low Battery Alarm: Receive notifications when the device's battery level drops below 20%.
  • SOS/Panic Alarm: Press and hold the panic/emergency button for 3 seconds to activate. The device will beep, the green light will blink, and an SOS message will be sent to the app. The device will then dial authorized numbers in chronological order until an alarm receiver connects. To end the call, press the panic/emergency button.
  • Speeding Alarm: Set a maximum speed limit, triggering an alarm if exceeded.
  • Power Saving Mode: Activate deep sleep mode to conserve battery.
  • Position Update Interval: Adjust the frequency of position updates (e.g., 30 sec, 1 min, 2 min, 3 min intervals).
  • Comments: Add additional information or notes about your MiniFinder device within the app.
  • Geofence Alarm: Create virtual boundaries on the map. An alarm is triggered if the device enters or leaves a defined area, sending notifications, ringing, and an email.
  • Tag Function (Mark Places): Long-press on the map to mark specific locations with custom details and images.
  • APP Settings: Configure various app settings, including map type, screen-alive function, tooltip display, alarm settings, email notifications, and language.
  • User Manuals: Access user manuals for all MiniFinder products within the app.

Maintenance Features:

• Charging: Use the provided Micro USB charging cable and charging station. The blue LED indicates charging, and turns off when fully charged.
• Safety Instructions:
  • Read and follow all instructions and warnings.
  • Do not open the unit or tamper with it.
  • Do not use abrasive cleaners.
  • Avoid extreme temperatures, saunas, direct sunlight, or open flames.
  • Do not throw the device in fire as the battery can explode.
  • Do not attempt to disassemble the device; it contains non-replaceable components.
  • Keep out of reach of children under 3 years of age due to small components.
• Battery Precautions:
  • Do not attempt to open or replace the built-in battery.
  • Charge the battery according to instructions using only a CE certified charger (not a "Fast Charger") or a certified computer, hub, or power supply.
• Recycling: Dispose of the product separately from ordinary household waste at recycling centers to conserve natural resources.

MiniFinder PICO Specifications

General

Brand	MiniFinder
Model	PICO
Category	GPS
Language	English