14
Taking Color Measurements
● When taking measurements, be careful to hold the CHROMA METER so that the receptor
window is clear of shadows (such as your own shadow) and reflected light.
● Illuminance unit is selectable lx or fcd. (page 8)
Measuring Method
1. Press [MODE].
◆ The CHROMA METER enters color measurement mode.
● You can now press [MODE] again to change the display
mode. Each press cycles you to the next display mode,
as shown in the illustration.
2. Set the HOLD button to the RUN position (pop the button out).
3. Aim the receptor at the light source you want to measure.
◆ The display shows the measurement result.
● If you wish to hold the measurement, push in the HOLD
button. (If the measurement intensity is 10 lx (1fcd) or
less, the display’s backlight will come on for 30 seconds.)
● To cancel the hold, press and then release the hold but-
ton (so that it pops out).
To Next Page
Loading...
