30
1. Press and release the HOLD button, so that it pops out (into RUN
position).
◆ The CHROMA METER begins taking measurements.
2. Open the slide cover, and press [CF].
● The display now shows the CF-corrected results. Note
that the CF indication appears at the top of the display.
You can toggle CF correction OFF and ON by pressing the [CF] key.
● Stored CF values remain in memory until you change them.
● If you wish to clear the stored CF values, return to the procedure described under “Setting
the CFs” (starting on page 26) and manually input 0s into all columns.
Applying CF Correction to Measurements
To Next Page
Loading...
