6-12
3. When the Message “Stapler is empty.” Appears
When a Message Appears
Chapter 6
Press and turn the knob and open the cover at
therearoftheFinisher.
Slide out the Staple Unit.
While pressing down the green lever, pull out
the Staple Cartridge.
Remove the empty staple clip from the
Staple Cartridge.
Load a new staple clip into the Staple
Cartridge and carefully peel off the Seal.
Insert the Staple Cartridge into the Staple
Unit until it clicks into place.
Align the arrows and firmly push the Staple
Unit down into the well.
Press and turn the knob to lock the cover.
Mailbin Finisher
1
1155O766AA
2
1166O127AA
3
1166O128AA
4
4002O340AA
5
4002O341AA
6
1166O130AB
7
1166O131AB
8
1155O767AA
To Next Page
Loading...
