- 33 -
Press the scroll ( ) buttons until the
macro-mode icon is displayed on the data
panel.
• In macro mode, the LCD monitor cannot be
turned off.
Press the flash-mode/delete button or
press the shutter-release button partway
down to set the macro function.
• The flash will not fire in macro mode.
Use the LCD monitor to compose the
picture.
• For best results, steady the camera on a
stable surface or use a tripod.
Press the shutter-release button partway
down to lock the focus.
• If the green focus lamp blinks, check that
your subject is within the macro focus range:
0.3m to 0.6m (1 ft. to 2 ft.).
Press the shutter-release button all the
way down to take the picture.
• After the picture is taken, the macro-mode
setting will remain in effect until the camera is
reset or turned off.
To Next Page
Loading...
