- 82 -
CONNECTING TO A COMPUTER
CONNECTING TO WINDOWS 98
When the camera is plugged into
the computer, the operating system
will detect the new device and the
add-new-hardware-wizard window
will open. Place the DiMAGE E201
CD-ROM in the CD-ROM drive.
Click “Next.”
Choose the recommended Search
for best driver for your device.
Click “Next.”
On the next screen, choose to Specify
a location of the driver. The driver on
the CD-ROM should be displayed; the
browse window can be used to find the
driver. When the driver location is shown
in the window, click “Next.”
The add new hardware wizard will
confirm the location of the driver.
Click “Next” to install the driver in
the system.
• One of two drivers may be
located: Coachmsd.inf or
Chiomsd.inf.
To Next Page
Loading...
