- 75 -
BEEP
SETTING THE VIDEO-OUT SIGNAL
The camera has an audio signal which indicates when a button has been pressed. This
tone can be turned off or on.
Camera images can be displayed on a television (p.60). The video-out signal can be
changed between NTSC and PAL. North America uses the NTSC standard and Europe
uses PAL. To playback images on a television, check which standard is used in your
region.
RETURNING TO THE DEFAULT SETTINGS
The default operation returns camera functions to their original settings. When default is
selected and entered, a confirmation screen is displayed; highlighting and entering
“NO” will cancel the operation, “YES” will execute the operation. The following are reset:
* Reset to the default setting when the camera is turned off.
1. The default settings for the North American and Japanese markets are the
year/ month/ day format and NTSC. The day/ month/ year format and PAL are the
default settings for all other markets.
Default setting
Image quality (p. 46)
Image size (p. 47)*
White balance (p. 48)*
Sharpness (p. 49)*
Camera sensitivity (ISO) (p. 49)
Interval (Slide Show, p. 57)*
Direction (Slide Show, p. 57)*
LCD monitor brightness (p. 74)
Auto-power-off period (p. 74)
Date format (p. 74)
Beep (p. 75)
Video out (p. 75)
Standard (STD.)
Full
Auto
Normal
Normal
3 seconds
Forward
Normal
3 minutes
Regional setting
1
On
Regional setting
1
To Next Page
Loading...
