The last window will confirm the
driver has been installed. Click
“Finish” to close the add new
hardware wizard.
When the my-computer window is
opened, a new removable-disk icon
will be displayed. Double click on the
icon to access the camera’s
CompactFlash card, see page 84.
• The driver needs only to be installed once.
The computer will automatically recognise
the camera and display the removable-disk
icon the next time they are connected.
When the camera is plugged into the
computer, the operating system will detect
the new device and the add-new-
hardware-wizard window will open. Place
the DiMAGE E201 CD-ROM in the CD-
ROM drive. Choose to Specify the
location of the driver and then click
“Next.”
- 79 -
CONNECTING TO A COMPUTER
CONNECTING TO WINDOWS ME
The add new hardware wizard will confirm
the location of the driver. Click “Next”to
install the driver in the system.
On the next screen, choose again to
Specify a driver location. The browse
window can be used to find the driver on
the CD-ROM. When the driver location is
displayed in the window, click “Next.”
To Next Page
Loading...
