Minolta EP1085 - 5 Service Mode; Service Mode Function Tree

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-16
• This mode is used by the Tech. Rep. to set, check, adjust, and/or program various ser-
vice functions.
5 SERVICE MODE
5-1. Service Mode Function Tree
C-0 : Plug-In Counter counting
C-1 : Size Counter counting
C-2 : Total Counter counting
C-4 : Maintenance Call Reminder ON/OFF
C-5 : PM Counter
C-6 : Plug-In Counter copying enable/disable
C-7 : IU 60K stop
C-15 : Toner empty stop
C-20 : Leading edge erase
C-21 : Trailing edge erase
C-23 : Loop length adjustment
C-31 : 1-sided original stop position adjustment
C-32 : 2-sided original stop position adjustment
C-33 : 2-in-1 original stop position adjustment
C-34 : 2-in-1 original distance adjustment
C-37 : S-ADF mode original stop position adjustment
C-38 : ADF Registration Loop adjustment
C-40 : Orig. copy type
C-90 : ATDC detection level
Service
Mode
F1 : Paper passage test
F2 : PC Drum Charge/Image Transfer Coronas output
F3 : Exposure Lamp voltage adjustment
F4 : Paper Separator Corona output
F5 : AE Sensor automatic adjustment
F6 : Edge Erase Lamp check
F7 : Original Size Detecting Unit adjustment
F8 : ATDC Sensor automatic adjustment
F9 : IU check, optimum exposure adjustment
FA : Scanner/Image Erase Lamp operation check
Tes t
~
✽
ServiceModeNo.1
ServiceModeNo.2
✽
For 23 cpm Copier only
Tech. Rep.
Choice
✽
✽✽
✽✽
✽
✽
✽
✽✽
✽✽
✽
✽
For 23 cpm Copier only
✽✽
For 18/23 cpm Copier only
Altering Fixed Zoom Ratios
ServiceModeNo.3