Minolta EP1085 - Cleaning of the Paper Take-Up Rolls; Removal of the Paper Take-Up Rolls; Removal of the Suction Unit

To Next Page

To Previous Page

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT

98.04.13

D-12

(2) Removal of the Paper Take-Up Rolls

(3) Cleaning of the Paper Take-Up Rolls

(4) Removal of the Suction Unit

1. Remove one screw to remove the Paper Take-Up

Roll.

1139D088AA

1. Remove the Paper Take-Up Unit from the copier.

2. Using a soft cloth dampened with alcohol, wipe

clean the Paper Take-Up Rolls.

1139D089AA

1. Remove the Fusing Unit. (See p. D-40.)

2. Unplug the Suction Fan connector and remove the

wire from the clamp.

1151D029AA

3. Remove four screws to remove the Suction Unit.

1151D030AA

Other manuals for Minolta EP1085