Minolta EP1085 - 3 Adjustment; Jigs and Tools Used

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-49
Important
• When adjusting the positions of the Scanner and Mirrors Carriage, use Jigs numbered
➂
and ➃.
• When adjusting the gap between the Doctor Blade and Sleeve Roller, use Jigs numbered
➄ and ➅.
3 ADJUSTMENT
3-1. JIGS AND TOOLS USED
➀ Cable Holding jig
1139D071AA
➁ Front Door Interlock
Switch Actuating Jig
1174D009AA
➂ Scanner Positioning jig
1139D073AA
➃ Scanner/Mirrors
Carriage Positioning jig
1151D022AA
➄ Sleeve/Magnet Roller
Position jig
1139D075AA
➅ D.B. Adjusting jigs
1074D129