The external port : This mode helps you to trigger your camera via a device that
you connect externally. For instance, you can use an external microphone to send
signal command above a specific decibel to trigger your camera to take a shot.
You can use both of the outputs at the same time. They are electrically isolated
from each other. They trigger the connected device synchronously.
The camera cables are designed to trigger the cameras only. Do not use it for any
other purpose. Doing so may damage the cable or the device.
5. Mobile Application
We offer a Capsule360 mobile app which has been designed as an interface to
configure and control your Capsule360 easily. The communication between the
smartphone and Capsule360 is done over Bluetooth connection. So, your
smartphone has to be compatible with Bluetooth 4.0.
Capsule360 mobile app is available on iOS and Android platforms. Search for
Capsule360 in your app store, or use the following buttons to download the app.
6. Connecting to Capsule360
Warning: Please make sure that your Bluetooth is turned ON in the connection
preferences of your smartphone or tablet.
After opening the mobile app, a list of available devices will appear. In case your
device is not shown in the list, make sure that your Capsule360 is turned ON and
click the renew button (at the top right-hand side of the screen) again.
You can connect to multiple Capsule360 devices at the same time. They will be
shown in various colors.
6.1 Connection Lights of Capsule360
To Next Page
Loading...