Motion Settings : To turn Capsule360 to its starting point after the programmed
movements are finished, touch the “motion settings” button at the top left-hand
side of the app screen.
Smartphone Button : If you want to use your smartphone`s camera to shooting,
turn on the smartphone setting button by touching the white button which is left-
hand on the screen.
After you have set the parameters, touch the start button to begin the shooting
process.
9.5. HDR Timelapse
The HDR Timelapse mode combines the time-lapse with HDR (High Dynamic Range)
mode. In other words, each frame of the time-lapse video will be an HDR photo.
This can be a complex goal to achieve, but the HDR Timelapse mode takes care of
it very easily. This mode divides the screen into two parts. The upper part of the
screen is about the PAN value. The lower part of the screen shows the HDR settings
The HDR part has six parameters to be adjusted, Interval value, Frames Peer
Second (FPS), Center, EV(+-), Frame and Play Time.
PAN : Set the angle of turning value by swiping your finger under the circle on the
screen. You can choose start ( S ) and finish ( F ) point by using S an F buttons.
Before you start shooting, if you want to control shooting area of your camera, you
can use the grey button inside of the PAN circle.
CCW : Counterclockwise ( Your Capsule360 will turn in counterclockwise direction.
)
CW : Clockwise ( Your Capsule360 will turn in clockwise direction.)
To Next Page
Loading...
