4. Commissioning
MiR Fleet PC Getting Started (en) 08/2020 - v.1.4 ©Copyright 2019-2020: Mobile Industrial Robots A/S. 31
6. Select the robot group you want to assign the robot to by clicking on its name.
7. The robot is now assigned to the group.
Charging groups
In MiR Fleet, charging groups are used to assign a certain set of charging stations to any
number of robots. This is useful if you have enabled auto charging, and you have a set of
chargers and robots in two isolated areas. Using charging groups ensures that robots from
one area do not try to dock to charging stations in the second area.
Follow these steps to create a charging group:
1. Go to Setup > Robots and select Create/Edit groups. Select Create/Edit groups in the
next window.
To Next Page
Loading...