Mircom MiEntry TX3 Series User Manual

Appendix
TX3 MiEntry Manual 25
Copyright 2020
• Open Door Digit. MiEntry sends a DTMF signal to the TX3 Nano
or TX3 Touch Screen to open the door. By default, this is 9 in the
TX3 Nano, TX3 Touch Screen, and MiEntry. If this number is
changed in the TX3 Nano or TX3 Touch Screen, then you must also
change it here.
Figure 26. Advanced settings on Android

Mircom MiEntry TX3 Series Specifications

General

Brand	Mircom
Model	MiEntry TX3 Series
Category	Intercom System
Language	English