Page 49
PROGRAMMING MENU NSL
(SCROLLING)
NSL (NON-
SCROLLING)
ADC
(SCROLLING)
ADC (NON-
SCROLLING)
Explanation/Description
Enter Name
[______________]
UU
Enter the resident’s name
(15 digits)
Enter Telephone No.
[______________]
UU
Enter the resident’s
telephone number (14
digits including comma
which is used as 1 second
delay).
Press # and the 1
for comma. Press # and
2 for space. Press #
twice to finish entering the
phone number.
Enter Dial Code
[_ _ _ _]
UUUU
Enter the resident’s Dial
Code
(4 digits)
Enter Relay Code
[_ _ _ _]
UU
Enter the resident’s
assigned Relay Code.
Note: Relay codes start at
0000 for first relay.
Enter NSL-ID
[_ _]
UU
Enter the ID decimal
value of NSL controller for
above resident (2 digits).
Enter Elevator Code
[_ _]
UUUU
Enter the Elevator
Restriction Relay number
for above resident.
Note: Relay codes start at
00 for first relay.
Press # or enter 99 to
disable, if no elevator
control is used.
Enter Elevator ID
[_ _]
UUUU
Enter the ID (decimal
value) of the Elevator
Restriction controller for
above resident.
Enter Keyless Code
[_ _ _ _]
UUUU
Enter the assigned
Keyless Code for above
resident (if used)
Enter Ring Pattern
[_ _]
UU
Enter the decimal value
for Ring Pattern for above
resident. See table below
for available ring patterns
(2 digits)
. Default is 02.
NOTE: Always remember the Command Keys (see Command Keys table on page 48) to move through the menu
and accept data.
Keyless Entry: To enter the premises with a keyless code, the user must first enter the number 0 at which point
they will be prompted with ‘Enter keyless code’. Enter your four digit keyless code and you will automatically gain
entrance to the premises. Example:
4 Digit Keyless code
0 XXXX
To Next Page
Loading...