Mitel 3300 - SX200 with ISDN

7/4/2004 Page 12 of 22
SX200 with ISDN
• Attach VCon IGC server to PRI card with straight through cable
o Configure hardware for Line Termination. Please refer to SX200
Technician’s Handbook for more information.
• Program trunks
o Please see Example of T1 PRI Programming on SX200
• Use IMAT to configure PRI card for DMS250, user side
• Reset PRI card to allow new configuration to load
• Program ARS
o See SX200 Technician’s Handbook for more information