Mitel 3300 - Feature Access Codes; Resilient 3300 ICP Systems Usage

7/4/2004 Page 8 of 22
Digital E and M Trunk Circuit Descriptor Assignment
Number:
4
Call Collision Handling:
AT&T
AT&T Call Collision Handling:
Backoff
Ignore Far End Disconnect:
No
Release Acknowledge Timer:
80
Address Signalling:
DTMF
Disconnect Timer:
300
Incoming Start Type:
Wink
Dial Tone on Incoming Seize:
No
Outpulse Delay Timer:
800
Outgoing Start Type:
Wink
Supervision Timer:
200
Maximum Wink Timer:
400
Minimum Wink Timer:
100
Guard Timer:
500
Fake Answer Supervision After Outpulsing:
No
Ignore Answer Supervision:
No
Release Supervision Expected:
Yes
Audio Inhibit Until Answer Supervision:
Yes
Far End Connection:
Main PBX
Facility Type:
Combination
Minimum Flash Timer:
250
Maximum Flash Timer:
200
Drop Digit Rcvr for Outgoing Audio Before Ans Sup:
No
Flash Timer:
300
Trunk Service Assignment
Trunk Service Number: 4
Release Link Trunk: No
Class of Service: 4
Class of Restriction: 1
Baud Rate: 300
Intercept Number: 1
Non-dial In Trunks Answer Point - Day:
Non-dial In Trunks Answer Point - Night 1:
Non-dial In Trunks Answer Point - Night 2:
Dial In Trunks Incoming Digit Modification -
Absorb:
0
Dial In Trunks Incoming Digit Modification - Insert:
Trunk Label: T1 Trunk