Mitel 622 DECT User Manual

Supplementary features
Mitel 622 DECT Phone 51
eud-1720/1.0 – R3.0 – 08.2015
Forwarding to voice mail
You cannot momentarily be reached on your phone. If you forward to your voice mail, a
user can leave you a voice message.
You can use the global greeting or your own greeting (see chapter "Configuring voice
mail", page 89).
For further information on voice mail refer to the User Guide Voice Mail Systems on the
Mitel DocFinder.
Note:
You can also find the call number of the user you are looking for in the
redial list.
To deactivate forwarding:
Press Menu > Activated features > Reset.
Notes:
• You can also forward calls to your Voice mail (see chapter
"Forwarding
to voice mail", page 51).
• You can also activate call forwarding by remote control, see chapter
"Setting functions by remote control", page 69.
Notes:
• One diversion applies to all connected phones, in one number user concept.
• Only one forwarding variant at a time is possible.
To activate forwarding:
Press the navigation key to the right or the Menu softkey.
Forwarding
Scroll to Forwarding and press the Select softkey.
Call Forwarding
Scroll to Call forwarding and confirm with the Ok Softkey.
Voice mail
Scroll to Voice Mail and confirm with the Ok softkey.
➔Forwarding is activated.
To deactivate forwarding:
Press Menu > Activated features > Reset.
Notes:
• You can specify whether your voice mail should answer directly (Call
forwarding) or with a delay (Forwarding on no reply), or only if you are
already on the phone (Forwarding if busy).
• A new voice mail message is signalled with a text message on the dis-
play and a red-flashing LED indicator in the idle state.

Mitel 622 DECT Specifications

General

Brand	Mitel
Model	622 DECT
Category	Cordless Telephone
Language	English