Personalizing your phone
Mitel 622 DECT Phone 93
eud-1720/1.0 – R3.0 – 08.2015
Function selection for configurable key
This section contains a list of all the functions you can store under a configurable key via
the menu. Contact your system administrator for more information.
More information on how to store functions under a configurable key using function com-
mands and function code can be found in chapter
"Formulating functions", page 96.
New
Creating a new key assignment:
1. Press the New softkey and select Function key.
2. Select the function and the setting you want and confirm with the Save
softkey.
➔Key assignment is stored.
Modify
Modify a key assignment:
1. Press the Modify softkey.
2. Make the changes and confirm with the Save softkey.
➔The key assignment is now stored.
Delete
Deleting a key assignment:
Press the Delete softkey.
➔Key assignment is deleted.
Notes:
• The selection of functions can be found in the chapter "Function selection for configu-
rable key", page 93.
• In addition to the large number of predefined functions you can also write your own
function (see chapter "Function commands, function codes", page 96).
Function Description
Call Forwarding With this function you forward incoming calls directly to a different
destination. For further information refer to chapter
"Forwarding calls
(Call forwarding)", page 49.
Call forwarding if busy With this function you forward incoming calls directly to a different
destination if you are busy. For further information refer to chapter
"Forwarding calls (Call forwarding)", page 49.
Call Forwarding on No
Reply
With this function you forward incoming calls you receive on your
phone to another destination. For further information refer to chapter
"Forwarding a Call on No Reply (CFNR)", page 50.
Switch group x This function lets you route calls and functions via switch groups.
Each switch group has three switching positions. The default position
is 1.
To Next Page
Loading...
Need help?
General
