36 Mitel 6920 SIP
eud-1763/2.0 – R6.0 – 06.2018
Phoning
you can call back users through one of these call lists. An individual call list
contains a maximum of 30 entries. More information on call lists can be
found in chapter "Editing options for the call list", page 69.
The call lists can be operated through the call list key, the redial key, the
system menu, or a function key (see chapter "Configuring keys", page 93).
Call list for unanswered/answered calls:
Press the Call lists key.
Or,
Press the Menu > Call lists softkey or press the function key for the Menu (if
defined). Alternatively, you can also press Call lists or Answered/Unan-
swered/Redial key (if defined as function key).
Scroll to Unanswered calls, or Answered calls and press the Select key.
➔A list of the most recent unanswered or answered calls (including the pres-
ence status of the contact) is displayed.
You can also press the navigation key to the right to view the most recent unan-
swered/answered calls/conversations.
Use the up and down navigation keys to scroll through the entries and select the
user you want.
Press the Detail softkey, or right navigation key, or Select key to view the
detailed information about the selected user.
Press the Dial softkey, or the Loudspeaker/Headset button, or pick up the hand-
set to dial the selected user’s phone number.
Note: After the call has been successfully connected, the entry is deleted from the
unanswered call list.
Redial list:
Press the Redial key.
➔A list of the most recent dialed numbers (including the presence status of the
contact) is displayed.
Use the up and down navigation keys to scroll through the entries and select the
user you want.
To Next Page
Loading...
