Phoning
Mitel 6920 SIP 37
eud-1763/2.0 – R6.0 – 06.2018
Dialing with a configurable key/ busy lamp field
You want to call someone whose phone number is stored under a configu-
rable key or a busy lamp field.
To find out how to configure a configurable key, refer to chapter "Configur-
ing keys", page 93.
Dialing with the line key
You can make a call through a line key.
Your phone is equipped with two dedicated line keys with LED (two top
softkeys configured as line keys).
Your system administrator can set up to seven additional line keys (nine in
total). The actual number of line keys depends on the system configura-
tion. Press a dedicated line key directly or select a line by pressing the hor-
izontal right navigation key. The display shows the dialed line number (L1,
L2 etc.). If a line is free, then the New Call softkey at the bottom left of the
display can be used
Line keys are stored on configurable keys by your system administrator
(see chapter "Line keys on a key telephone", page 76
).
Press the right navigation key or the Select key to view detailed information
about the selected user.
Press the Dial softkey, or the Loudspeaker/Headset button, or pick up the hand-
set to dial the selected user’s phone number.
➔The call number of the user is dialed.
Phoning with the handset:
1. Pick up the handset.
2. Press the desired configurable key/busy lamp field.
➔The phone number is dialed.
Using your phone in hands-free mode:
Press the desired configurable key/busy lamp field.
➔The phone number is dialed.
To Next Page
Loading...
