Mitel AG4100 Series - 1 Precautionary Guidelines; About the Mitel Ag4100 Analog Gateways; General Guidelines; Location Guidelines

MITEL AG4100 ANALOG GATEWAY - QUICK INSTALLATION GUIDE
4 04/2024
1 PRECAUTIONARY GUIDELINES
1.1 ABOUT THE MITEL AG4100 ANALOG GATEWAYS
The Quick Installation Guide provides the information for the hardware installation of the
Mitel AG4124 and AG4172.
The following guides provide complete information about the Mitel AG4100 Analog Gateways:
• AG4124/AG4172 Analog Gateway Administration Guide:
https://www.mitel.com/document-center/devices-and-accessories/networking-
equipment/ag4100-analog-gateway/ag4124
• Mitel Sweden Documentation Libraries (for the MX-ONE 7.6 and later, Mitel AG4124
only):
https://mitel365.sharepoint.com/sites/MX-ONE-
Documentation/CPIDocumentation/index.aspx
• Mitel EX Controller, Mitel GX Gateway, TA7100 and AG4124 – Installation and
Configuration (for the MiVoice 5000 only):
https://www.mitel.com/document-
center/business-phone-systems/mivoice-5000
• MiVoice 5000 Release 8.1 Personal Data Protection and Privacy Controls:
https://www.mitel.com/document-center/business-phone-systems/mivoice-5000
• Mitel AG4100 Series Gateway Information and Safety Recommendations:
https://www.mitel.com/document-center/devices-and-accessories/networking-
equipment/ag4100-analog-gateway/ag4124/all-releases/en/mitel-ag4100-series-gateway-
information-and-safety-recommendations
The other documents for the Mitel AG4100 Analog Gateways and Mitel® products are available
on the Mitel Document Center web site. https://www.mitel.com/document-center
ATTENTION:
The Mitel AG4172 is available
for the MiVoice Business and the MiVoice 5000
products only.
1.2 GENERAL GUIDELINES
To ensure that the Mitel AG4100 Analog Gateways works well, adhere to the following guidelines:
• Follow the safety recommendations. refer to the document Mitel AG4100 Series
Information and Safety Recommendations delivered with the Mitel AG4124 and AG4172
and available on the Mitel Document Center:
https://www.mitel.com/document-
center/devices-and-accessories/networking-equipment/ag4100-analog-gateway/ag4124,
• Allow only the authorized personnel to install and maintain the Analog Gateway,
• Make sure the network bandwidth is sufficient to maintain a stable Analog Gateway
operation. Refer to the section 7.4 - Network Requirements in the document
AG4124/AG4172 Analog Gateway Administration Guide available on the Mitel Document
Center:
https://www.mitel.com/document-center/devices-and-accessories/networking-
equipment/ag4100-analog-gateway/ag4124
1.3 LOCATION GUIDELINES
To avoid premature aging of the controller; ensure user security; and facilitate access, upgrades,
and maintenance, adhere to the following guidelines to choose the Analog Gateway location:
• Install the Analog Gateway in a 19 inches (48,26 cm) rack or on a flat, horizontal surface,
• Maintain a minimum of 25 mm (1 in.) clearance around the perimeter of the Analog Gateway,
exclusive of the Analog Gateway mounting points (rack or benchtop).
• Install the Analog Gateway in a restricted and secure location where it is only accessible by
authorized personnel.