32/1531-ANF 901 43 Uen B2 2016-04-01
Installation Guide
Base Station
4
Contents of the Box
The box in which the IPBS440 is packed contains:
• An IPBS440 for external antennas
• Two antennas
• A mounting bracket
• Two screws with wall plugs
NOTE: The IPBS440 cannot be mounted with the antennas pointing downwards as the
mounting bracket does not support it.
Insert the antennas into the IPBS440 before following the installation instructions in 3.2
Install the Base Station on page 15.
2.2 IPBS4X2
The following versions of the IPBS4x2 are available:
• IPBS432 with internal antenna
• IPBS442 with external antennas
The IPBS 4x2 is backward compatible with the IPBS 4x0 when it comes to coverage,
functionality, accessories and mounting bracket. If an old IPBS 4x0 has to be replaced
you just reuse the mounting bracket and install the IPBS4x2.
To Next Page
Loading...
