1 OVERVIEW
1.1 Features
7
1
Easy system configuration
Configure the entire network of CC-Link IE Field Network Basic in the master station. To perform the cyclic transmission, set
an IP address and subnet mask to each slave station. Setting the information of the master station to each slave station is not
required.
In addition, since the devices are connected in star topology, there are no restrictions on the connection order or connection
position of devices. Thus, it is also easy to connect a new slave station.
CC-Link IE Field Network Basic does not require setting of the connection with the slave station.
(1) Configure the entire network of CC-Link IE Field Network Basic in the master station.
(2) Set the IP address and subnet mask.
(3) There are no restrictions on the connection order or connection position when a new slave station is added on the same network. Changing the setting for
existing slave stations is not required.
To Next Page
Loading...
