Mitsubishi Electric FX3U-232-BD - For Non-Applicable Versions (Setting an Alternative Model)

E-7
FX Series PLC User's Manual - Data Communication Edition
Inverter Communication
1 Outline
1.4 Programming Tool Applicability
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter Communication
F
Non-Protocol Communication (RS/RS2 Instruction)
G
Non-Protocol Communication (FX
2N
-232IF)
H
Programming Communication
I
Remote Maintenance
Apx.A
Discontinued models
2. Japanese versions
1.4.2 For non-applicable versions (setting an alternative model)
In FX2N, FX2NC, FX3G, FX3U and FX3UC PLCs, it is not possible to create programs using programming tools
of inapplicable versions.
Select "FX
3G" in model selection when creating programs using a programming tool whose version is not
applicable to the FX
3S and FX3GC PLC.
Point
In the FX
3S PLC, set the memory capacity for PLC parameters to 4,000 steps or less.
Product name Model name Applicable version Remarks
FX3U and FX3UC PLCs
GX Works2 SWDNC-GXW2-J Ver. 1.07H or later
The IVMC instruction is supported in
Ver. 1.45X or later.
GX Developer SWD5C(F)-GPPW-J Ver. 8.13P or later The IVMC instruction is not supported.
FX-30P Ver. 1.00 or later
The IVMC instruction is supported in
Ver. 1.20 or later.
GOT1000 Series display units
Refer to manuals of GOT1000 Series display units for applicable
models and versions supporting the list editor function.
FX3G PLC
GX Works2 SWDNC-GXW2-J Ver. 1.07H or later
The IVMC instruction is supported in
Ver. 1.56J or later.
GX Developer SWD5C(F)-GPPW-J Ver. 8.72A or later The IVMC instruction is not supported.
FX-30P Ver. 1.00 or later
The IVMC instruction is supported in
Ver. 1.50 or later.
GOT1000 Series display units
Refer to manuals of GOT1000 Series display units for applicable
models and versions supporting the list editor function.
FX3GC PLC
GX Works2 SWDNC-GXW2-J Ver. 1.77F or later -
FX-30P Ver. 1.30 or later
The IVMC instruction is supported in
Ver. 1.50 or later.
GOT1000 Series display units
Refer to manuals of GOT1000 Series display units for applicable
models and versions supporting the list editor function.
FX3S PLC
GX Works2 SWDNC-GXW2-J Ver. 1.492N or later
-
FX-30P Ver. 1.50 or later
GOT1000 Series display units
Refer to manuals of GOT1000 Series display units for applicable
models and versions supporting the list editor function.
FX2N and FX2NC PLCs
GX Works2 SWDNC-GXW2-J Ver. 1.07H or later
The versions shown on the left
supporting EXTR instruction
are applicable.
GX Developer SWD5C(F)-GPPW-J SW7 A or later
FX-PCS/WIN SW0PC-FXGP/WIN Ver. 4.20 or later
FX-30P Ver. 1.00 or later
FX-20P(-SET0)
FX-20P-MFXD
Ver. 5.10 or later
FX-10P(-SET0) Ver. 4.10 or later
GOT-F900 Series display units
F940WGOT-TWD
F940GOT-*WD
F940GOT-*BD-H
F940GOT-*BD-RH
F940WGOT-TWD (Ver. 1.30 or later)
F940GOT-LWD, F940GOT-SWD (Ver. 6.30 or later)
F940GOT-LBD-H, F940GOT-SBD-H (Ver. 6.30 or later)
F940GOT-LBD-RH, F940GOT-SBD-RH (Ver. 6.30 or later)
GOT1000 Series display units
Refer to manuals of GOT1000 Series display units for applicable
models and versions supporting the list editor function.