Mitsubishi Electric FX3U-232-BD - Cautions on Using FXGP;WIN

I-12
FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
1 Outline
1.4 Programming Tool Applicability
In the case of non-applicable versions
A non-applicable programming software version cannot offer remote maintenance.
If your programming software is a non-applicable version, upgrade versions.
To upgrade versions, contact your dealer.
1.4.3 Cautions on using FXGP/WIN
1. The remote maintenance function cannot be used when FXGP/WIN is used in the following
versions of Windows:
- Windows NT

4.0
- Windows

2000
- Windows

XP
2. For FX3U and FX3UC Series
The models "FX3U" and "FX3UC" cannot be selected.
"FX
2N" can be selected and set as the alternative model.
However, FXGP/WIN cannot be connected to a PLC in which the PP modem mode is set.
3. For FX3S, FX3G and FX3GC Series
The models "FX3S", "FX3G" and "FX3GC" cannot be selected.
"FX
1N" can be selected and set as the alternative model.
However, FXGP/WIN cannot be connected to a PLC in which the PP modem mode is set.