Mitsubishi Electric FX3U-232-BD - Applicable Inverters

E-111
FX Series PLC User's Manual - Data Communication Edition
Inverter Communication
9 Creating Programs (FX3S, FX3G, FX3GC, FX3U, FX3UC)
9.9 Controls Operations and Monitors Operations of an Inverter with a Single Command(PLC  Inverter)[FNC275 / IVMC]
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter Communication
F
Non-Protocol Communication (RS/RS2 Instruction)
G
Non-Protocol Communication (FX
2N
-232IF)
H
Programming Communication
I
Remote Maintenance
Apx.A
Discontinued models
• If a device number outside the range due to indexing, etc. is specified in , the receive data from the
inverter is not stored in . However, values set in and +1 may be written to the inverter.
• If any unspecified value is set in , unexpected data may be written to and read from the inverter, and
values of and +1 may be updated.
• IVMC instruction reads the inverter status at the time of communication with the inverter, and stores the
read status to . Accordingly, the status written by the IVMC instruction can be read by a next or later
read instruction (IVCK or IVMC).
9.9.2 Applicable inverters
This instruction is applicable to the following inverters:
• FREQROL-A800 (Applicable in all)
• FREQROL-F800 (Applicable in all)
• FREQROL-E700 (February 2009 and later)
• FREQROL-D700 (Applicable in all)
For details, refer to the respective inverter manual.
9.9.3 Applicable programming tool
The following programming tools support this instruction.
1. English versions
2. Japanese versions
Product name Model name Applicable version Remarks
FX3U and FX3UC PLCs
GX Works2 SWDNC-GXW2-E Ver. 1.48A or later
-
FX-30P Ver. 1.20 or later
FX3G PLC
GX Works2 SWDNC-GXW2-E Ver. 1.62Q or later
-
FX-30P Ver. 1.50 or later
FX3GC PLC
GX Works2 SWDNC-GXW2-E Ver. 1.77F or later
-
FX-30P Ver. 1.50 or later
FX3S PLC
GX Works2 SWDNC-GXW2-E Ver. 1.492N or later
-
FX-30P Ver. 1.50 or later
Product name Model name Applicable version Remarks
FX3U and FX3UC PLCs
GX Works2 SWDNC-GXW2-J Ver. 1.45X or later
-
FX-30P Ver. 1.20 or later
FX3G PLC
GX Works2 SWDNC-GXW2-J Ver. 1.56J or later
-
FX-30P Ver. 1.50 or later
FX3GC PLC
GX Works2 SWDNC-GXW2-J Ver. 1.77F or later
-
FX-30P Ver. 1.50 or later
FX3S PLC
GX Works2 SWDNC-GXW2-J Ver. 1.492N or later
-
FX-30P Ver. 1.50 or later
D
D
S 3
S 3
S 2
D D
D