Mitsubishi Electric Melsec A Series - Page 130

REPLACEMENT OF MELSECNET (II) AND /B (REMOTE I/O NETWORK)
3 - 18
3
(d) MELSECNET local station, remote I/O station
As all stations perform cyclic communication according to the network range assignments of the
master station (A3ACPU), the network range assignment parameters of local stations and remote
I/O stations need not be set.
(e) MELSECNET/H control station (network 1)
The following shows the network parameter settings for when a station is replaced with a
MELSECNET/H control station (network 1).
1) Network parameter setting (Q06UDVCPU: MELSECNET/H control station, remote master station)
2) Network range assignment (Q06UDVCPU: MELSECNET/H control station)
3) Network range assignment (Q06UDVCPU: MELSECNET/H control station)