Mitsubishi Electric Melsec A Series - Page 134

REPLACEMENT OF MELSECNET (II) AND /B (REMOTE I/O NETWORK)
3 - 22
3
(g) MELSECNET/H normal station (network 1)
The following shows the network parameter settings for when a station is replaced with a
MELSECNET/H control station (network 1).
The same parameter settings are required on all normal stations.
1) Network parameter setting (1 Ns 2: MELSECNET/H normal station)
2) Refresh parameters (1 Ns 2: MELSECNET/H normal station)