Mitsubishi Electric Melsec A Series - Page 52

REPLACEMENT OF MELSECNET (II) AND /B (PLC TO PLC NETWORK)
2 - 15
2
(c) MELSECNET/H control station
The following shows the network parameter settings after replacing with the MELSECNET/H control
station (Q06UDVCPU).
1) Network parameter setting (Q06UDVCPU: MELSECNET/H control station)
2) Network range assignment (Q06UDVCPU: MELSECNET/H control station)
3) Refresh parameters (Q06UDVCPU: MELSECNET/H control station)