2 - 36
REPLACEMENT OF MELSECNET (II) AND /B (PLC TO PLC NETWORK)
2
(g) MELSECNET/H network 1 normal station 1Ns1/Network 2 control station 2Mp3
(Network range assignment of gateway stations, refresh parameters)
For MELSECNET/H network 1 normal station 1Ns1 that is gateway station, change the settings by:
• Performing B/W refreshment by the setting of
"Refresh parameters"
*1
For MELSECNET/H network 2 control station 2Mp3 that is gateway station, change the settings of
MELSECNET (II) 3-tier master station by:
• Assigning LB/LW to each station by the setting of
"Network range assignment (Common
parameters)
"
*2
• Assigning
B/W refreshment by the setting of "Refresh parameters"
*1
*1 Set not to duplicate B/W on the CPU.
*2 Perform the LB/LW assignment for network 2 control station 2Mp3 including the same LB/LW area as that of 1Mp3 to relay
network 1 control station 1Mp3.
1Mp3
1Ns1
1Ns2
0
1FFF
1Mp3
2Mp3
2Ns1
2Ns2
1Ns2
0
CPU
2Ns1
2Ns2
0
1FFF
37F
1FFF
200
27F
100
2Mp3
1Mp3
100
180
200
280
180
2Mp3
280
100
37F
180
200
Link refresh
Common parameters
B/W
LB/LWLB/LW
MELSECNET/H network 1
Normal station 1Ns1
MELSECNET/H network 2
Control station 2Mp3
To Next Page
Loading...
