Mitsubishi Electric MELSEC FX2NC-16MT-D/UL - Triac Output Example; Applying Safe Loads

FX2NC Series Programmable Controllers Outputs 6.
6-17
6.3.3 Triac output example
6.4 Applying safe loads
Ensure all loads are applied to the same side of each PC output, see previous figures.
Loads which should NEVER simultaneously operate (e.g. direction control of a motor),
because of a safety critical situation, should not rely on the PC's sequencing alone.
Mechanical interlocks MUST be fitted to all safety critical circuits. (See preceding figure.)
Table 6.9: Item check
n
AC power supply
o
Fuse
p
Solenoid valve
q
Incandescent lamp
r
Noise suppressor 0.1
µ
F capacitor+100-200
Ω
resistor
Y0
COM1
Y1 Y2 Y3 Y4
COM2
Y5
M
C
2
M
C
1
MC2 MC1
➊
➋
➌
r
➍
➋
Figure 6.10:Typical wiring