40
3 POSITIONING CONTROL STARTUP
3.4 Operation Check
Check the status of each area in the Axis Monitor window during JOG operation.
Axis monitor Checking details
PLC READY (Y0) ON?
READY (X0)
Synchronization flag (X1)
All axes servo ON (Y1)
Md.20: Feed current value
Md.21: Machine feed value
Md.26: Axis operating status JOG operation
Md.28: Axis federate 100.00 mm/min
Md.108: Servo status 1: READY ON ON?
Md.108: Servo status 1: Servo ON
BUSY Is Axis1 ON?
Cd.181: Forward JOG start Is the starting axis ON?
Cd.182: Reverse JOG start
To Next Page
Loading...
