44
3 POSITIONING CONTROL STARTUP
3.4 Operation Check
3. Confirming the home position return
1. Check the status and monitor display values shown above in the Axis Monitor window.
4. Home position return check is completed.
Axis monitor Checking value
Md.20: Feed current value 0.0[μm]
Md.21: Machine feed value 0.0[μm]
Md.26: Axis operating status Waiting
Md.28: Axis feedrate 0.00[mm/min]
Md.31: Status: HPR request flag OFF
Md.31: Status: HPR complete flag ON
To Next Page
Loading...
