147
CHAPTER 6 CPU MODULE
6
6.2 Specifications
6.2.1 Basic model QCPU
*5 Each of parameter, intelligent function module parameter, sequence program, SFC program, device comment, and initial
device value files can be stored.
*6 The number of points can be changed within the setting range.
( Qn(H)/QnPH/QnPRHCPU User's Manual (Function Explanation, Program Fundamentals)
*7 The step relay is a device for the SFC function.
*8 The value is for the CPU module and base unit together.
*9 The value includes the CPU module, base unit, and power supply module.
For the general specifications, refer to Page 117, CHAPTER 5.
No. of device points
Step relay [S]
*7
2048 points (S0 to 127/block) (The number of device points is fixed.)
Index register [Z] 10 points (Z0 to 9) (The number of device points is fixed.)
Pointer [P] 300 points (P0 to 299) (The number of device points is fixed.)
Interrupt pointer [I]
128 points (I0 to 127) (The number of device points is fixed.)
The cyclic interval of system interrupt pointers I28 to 31 can be set up by parameters.
(2 to 1000ms, 1ms unit)
Default values I28: 100ms, I29: 40ms, I30: 20ms, I31: 10ms
Special relay [SM] 1024 points (SM0 to 1023) (The number of device points is fixed.)
Special register [SD] 1024 points (SD0 to 1023) (The number of device points is fixed.)
Function input [FX] 16 points (FX0 to F) (The number of device points is fixed.)
Function output [FY] 16 points (FY0 to F) (The number of device points is fixed.)
Function register [FD] 5 points (FD0 to 4) (The number of device points is fixed.)
No. of device tracking words ----
Link direct device
Device for accessing the link device of a network module directly
Specified form: J\X, J\Y, J\W, J\B,
J\SW, J\SB
Intelligent function module device
Device for accessing the buffer memory of the intelligent function module directly.
Specified form: U\G
Latch range
L0 to 2047 (default)
(Latch range can be set up for B, F, V, T, ST, C, D, and W.) (Setting by parameters.)
RUN/PAUSE contact One contact can be set up in X0 to 7FF for each of RUN and PAUSE. (Setting by parameters.)
Clock function
Year, month, date, hour, minute, second and day of the week
(Automatic leap year detection)
Accuracy: -3.2 to +5.27s(TYP.+1.98s)/d at 0°C
Accuracy: -2.57 to +5.27s(TYP.+2.22s)/d at 25°C
Accuracy: -11.68 to +3.65s(TYP.-2.64s)/d at 55°C
Allowable momentary power failure
time
20ms or less (100VAC or
more)
Varies depending on the power supply module.
5VDC internal current consumption
0.26A
*8
0.25A 0.27A
External dimensions
H 98mm 98mm
W
244.4mm
*9
27.4mm
D 89.3mm
Weight
0.66kg
*9
0.13kg
Item
Basic model QCPU
Q00JCPU Q00CPU Q01CPU
To Next Page
Loading...
