Mitsubishi Electric Q06HCPU - Page 649

647
APPENDICES
A
Appendix 6 Added or Changed Functions Appendix 6.6 Universal model QCPU upgrade
IP address change function ( QnUCPU User's Manual
(Communication via Built-in Ethernet Port))
*1
B
"11082" or later --- ---
Local device batch read function
*1
"12012" or later
Version 1.31H or
later
×
CC-Link IE Field Network ( MELSEC-Q CC-Link IE Field
Network Master/Local Module User's Manual)
Send points expansion function (CC-Link IE Controller
Network module)
*1*6
"12052" or later
Version 1.40S or
later
×
Online change of inactive blocks (SFC) ( MELSEC-
Q/L/QnA Programming Manual (SFC))
*2
Expansion of SFC step relay points
*1*2
Operation mode setting at SFC double block START
( MELSEC-Q/L/QnA Programming Manual (SFC))
*2
SFC comment readout instruction ( MELSEC-Q/L/QnA
Programming Manual (SFC))
*2
---
Data up to 10238 bytes can be exchanged with the
SP.SOCSND/S(P).SOCRCV(S)/S(P).SOCRDATA instructions
( QnUCPU User's Manual (Communication via Built-in
Ethernet Port))
*2
Parameter-valid drive information
*1
---
Version 1.40S or
later
×
Program cache memory auto recovery function
*1
"12122" or later
--- ---
Extension of available index register range (Z0 to Z19) when
Jn and Un are used in the dedicated instruction
( Manuals for the network modules and the intelligent
function modules used)
"13022" or later
Storage of device memory error information (Memory check
function) (
Page 555, Appendix 3 (9))
Storage of program error location (Memory check function)
(
Page 507, Appendix 3 (1))
"13042" or later
Serial communication function
(Q03UD/Q04UDH/Q06UDH/Q10UDH/Q13UDH/Q20UDH/
Q26UDHCPU)
*1
"13062" or later
Version 1.62Q
or later
×
SFC control target block switching ( MELSEC-Q/L/QnA
Programming Manual (SFC))
"13102" or later
Version 1.73B or
later
×
AnS/A series compatible extension base unit
--- ---
Communication using the A-compatible 1E frame (MC
protocol) through built-in Ethernet port ( MELSEC-Q/L
MELSEC Communication Protocol Reference Manual)
IP packet transfer function (for CC-Link IE Field Network)
( QnUCPU User's Manual (Communication via Built-in
Ethernet Port))
*2*6
"14022" or later
Version 1.77F or
later
×
Own station number setting function for CC-Link IE Field
Network ( MELSEC-Q CC-Link IE Field Network
Master/Local Module User's Manual)
"14042" or later
Version 1.87R or
later
×
Function
Function
version
Serial number
(first 5 digits)
Programming tool version
GX Works2 GX Developer