3 - 6
3 COMMUNICATION BETWEEN THE PLC CPU AND THE MOTION CPU IN
THE MULTIPLE CPU SYSTEM
• The devices in settings 1 to 4 can be set individually for each CPU.
For example, you may set link relay for CPU No.1 and internal relay
for CPU No.2.
• Set the same number of points for all CPUs.
• When the CPU-side device
for CPU No.1 is the
same as that for CPU
No.2.
• When the CPU-side device
for CPU No.1 is different
from that for CPU No.2.
Refresh settings of CPU No.2
Refresh settings of CPU No.1
To Next Page
Loading...
