Mitsubishi Electric Q173CPU - 10 Motion Devices; Motion Registers (#0 to #8191)

10 - 1
10 MOTION DEVICES
10
10. MOTION DEVICES
The motion registers (#0 to #8191) and coasting timer (FT) are available as Motion
CPU-dedicated devices.
They can be used in operation control (F/FS) programs or transition (G) programs.
10.1 Motion Registers (#0 to #8191)
Motion device Item Specifications
Number of points 8192 points (#0 to #8191)
Data size 16-bit/point
Latch
Only a user device is latched.
(All points are cleared by latch clear operation.)
Usable tasks Normal, event and NMI
Motion register (#)
Access Read and write enabled in whole range
(1) Motion register list
• Common to all operating system
Device No. Application Signal direction
#0
to
User devices
(8000 points)
• Cleared by latch clear.
#8000
to
Motion SFC
dedicated devices
(64 points)
• Cleared at power on or reset only.
(Note-1)
• Cleared by the Motion SFC error history request flag
on (keep at power on or reset).
(Note-2)
#8064
to
#8191
Servo monitor
devices
(128 points)
• Cleared at power on or reset only.
(Note-1) : SW6RN-SV13Q /SV22Q (Ver. 00M or before)
(Note-2) : SW6RN-SV13Q
/SV22Q (Ver. 00N or later)
POINT
The motion registers (#) cannot be set as indirectly specified devices of mechanical
system programs.